Compressor Oils
Compressor Oils - Synthetic
A range of synthetic lubricants based on polyalphaolefins. The lubricants are fully formulated and contain zinc-free anti-wear additives, anti-oxidants, anti-foam and corrosion inhibitors.
ISO 32, 46, 68. ISO-L-DAH, Atlas Copco for use in their GA, GR, XR and SRH machines
Applications
Enersyn LPS-PO 68
High performance, low pour point, fully synthetic refrigeration compressor lubricant, based on polyalphaolefin technology.
ISO 68, Stahl Refrigeration Oil Type B
Applications
Enersyn RX 100
A high performance diester based synthetic lubricant.
ISO 100, DIN 51506
Applications
Compressor Oils – Mineral
Solvent refined high quality napthenic oil with a low pour point..
ISO 68. BS 2626: 1975
Applications
Energol LPT- F 46
ISO 46. BS 2626: 1975
Applications
Energol RC 68, 100
Compressor lubricants produced from highly refined mineral oils and incorporating anti-oxidant, anti-corrosion and anti-foam additives.
ISO 68, 100, DIN 51506, DIN 51352 (Pneurop Oxidation Test)
Applications
Designed for use in high pressure (>150 psi) reciprocating compressors under conditions of extreme duty, where the lubricant must exhibit properties of high oxidation stability, coupled with low carbon forming tendencies
Particularly suitable for compressors with high air-delivery temperatures – up to 220ºC - where oils of inferior quality would quickly deteriorate and leave carbonaceous deposits within the compressor and discharge system
Suitable for drip-feed vane type compressors that require oils with good oxidation stability and rust inhibitors, as well as circulatory lubrication systems of plain and roller bearings operating at high temperatures
Energol RC-R 32, 46, 68, 100
This range of lubricants is formulated using highly refined mineral oils and incorporates additives that minimise oxidation, deposit formation, foaming and filter blockage. Enhanced load carrying and anti-wear properties combat the effects of water contamination and prevent corrosion.
ISO 32, 46, 68, 100, ISO-L-DAG and DAH, DIN 51506, DIN 51 352 (Pneurop Oxidation test)
Applications
For the lubrication of rotors, bearings and gears of rotary air compressors, especially the oil flooded and oil injected screw types
Also suitable for use in many reciprocating compressors
Energol RC-R 32, 46, 68, 100
This range of lubricants is formulated using highly refined mineral oils and incorporates additives that minimise oxidation, deposit formation, foaming and filter blockage. Enhanced load carrying and anti-wear properties combat the effects of water contamination and prevent corrosion.
ISO 32, 46, 68, 100, ISO-L-DAG and DAH, DIN 51506, DIN 51 352 (Pneurop Oxidation test)
Applications
